XG-1021N
Specification
The Hardware specifications of the product are as below:
Table2.1 Hardware specification
|
Items
|
Description
|
|
|
Standard
|
IEEE802.11b/g
|
|
Chipset
|
Atheros AR2315(Without Super G)
|
|
Memory
|
Flah
|
SDRAM
|
|
4M
|
16M
|
|
Host Interface
|
One 10/100 BASE-T RJ-45 Ethernet connector
|
|
Restore to Default Button
|
Capable of restoring to the factory default settings
|
|
LED Status
|
PWR & SYS:
-On: Power & System on
-OFF: PWR & System off
WLAN:
-Blinking: Data TX/RX through wireless access point
-OFF : Wireless module disconnected
-ON: Wireless module in active.
Ethernet:
-RJ-45 connector with LED
|
|
Power Requirement
|
External power adapter: 12VDC @ 1.0 Amp Max.
PoE IEEE 802.3af support
|
|
Power Consumption
|
TX power consumption: 650mA(Power adaptor)
RX power consumption: 400mA(Power adaptor)
TX power consumption: 150mA(48v POE)
RX power consumption: 75mA(48v POE)
|
|
|
802.11b
|
802.11g
|
|
C1
|
C6
|
C11
|
C1
|
C6
|
C11
|
|
17.5dBm
|
21.5dBm
|
19dBm
|
15dBm
|
21.5dBm
|
17.5dBm
|
|
Sensitivity
|
IEEE 802.11g
Sensitivity @ Packet Error Rate: 10%
54Mbps:≦-74dBm
48Mbps:≦-76dBm
36Mbps:≦-81dBm
24Mbps:≦-83dBm
18Mbps:≦-87dBm
12Mbps:≦-87dBm
9Mbps:≦-86dBm
6Mbps:≦-94dBm
|
IEEE 802.11b
Sensitivity @ Packet Error Rate: 8%
11Mbps:≦-88dBm
5.5Mbps:≦-90dBm
2Mbps:≦-92dBm
1Mbps:≦-97dBm
|
|
Modulation
|
IEEE 802.11g (OFDM/DSSS)
48/54 Mbps (QAM-64)
24/36 Mbps (QAM-16)
12/18 Mbps (QPSK)
6/9 Mbps (BPSK)
|
IEEE 802.11b (DSSS)
5.5/11 Mbps (CCK)
2 Mbps (DQPSK)
1 Mbps (DBPSK)
|
|
Operating Frequency
|
IEEE 802.11b/g ISM Band
-Europe(ETSI): 2.412 GHz ~ 2.472 GHz (CH1 ~ CH13)
-North America(FCC) : 2.412 GHz ~ 2.462 GHz (CH1 ~ CH11)
|
|
Antenna Type
|
1 detachable dipole antennas of 3dBi with diversity
|
|
Antenna Connector
|
1 Reverse SMA connectors
|
|
WiFi Coverage
|
Indoor coverage 60 meters
|
The Firmware specifications of the product are as below:
Table2.2Firmware specification
|
Item
|
Description
|
|
Standard Compliance
|
IEEE 802.3 and 802.3u 10Base-T and 100Base-TX physical layer specification
IEEE 802.11g specification compliance for wireless LAN
IEEE 802.11b specification compliance for wireless LAN
IEEE 802.1x security standard support
Power over Ethernet, IEEE 802.3af compliant
|
|
Multiple BSSID
|
-Support up to 2 active SSID profiles; including 1 pre-defined “Guess” SSID (specifications of Guest SSID to be provided)
|
|
Operating Mode
|
-AP mode
– AP & Bridge simultaneously
-Bridge mode.
-Repeater mode
-Client mode
|
|
DHCP Client
|
Ability to act as a DHCP client to get IP address from DHCP server from LAN port.
In DHCP client mode, if DHCP server is not available, then use default IP address.
|
|
NetBIOS name resolution
|
Provides name resolution for device name
|
|
VPN pass through AP/Bridge mode
|
IPSec, PPTP and L2TP pass through support
|
|
Advanced filter for device management
|
User can specify the following to allow for device management including Web/FTP/Telnet
- Interface (WLAN or Ethernet)
- MAC address
- IP address
|
|
System monitoring
|
-System status
-Protocol trace
|
|
Management
|
- Embedded Web Configurator management
- Command-line interface
- Telnet support (Password-protected telnet access to internal configuration manager).
- FTP/TFTP/Web for firmware downloading and configuration backup and restore.
- Telnet remote access support.
- Built-in Diagnostic Tool
- SNMP Management
- Limitation of client connections (# is configurable, default: unlimited), can be in the same GUI page of MAC address filter
- NetBIOS name resolution, easy to manage device by using http://device name
|
|
Security
|
- MAC address filtering through WLAN (support 32 account)
- IEEE 802.1x security ( EAP-TLS, EAP-TTLS, and Win XP PEAP included )
- 64/152 bits WEP
- WPA/WPA2 support
- Mixed WPA& WPA2 mode (support both WPA and WPA2 clients)
|
|
Diagnostics Capabilities
|
- The access point can perform self-diagnostic tests. These tests check the integrity of the following sections:
- Syslog
- Errorlog
- Trace log
- Packet Log
|
1.3.Physical specification
The Physical specifications of the product are as below:
Table2.3 Physical specification
|
Items
|
Description
|
|
|
Dimension
|
114mm(L)*109mm(W)*30mm(H)
|
|
|
Weight
|
≦200g
|
|
The Environment specifications of the product are as below:
Table2.4 Environment l specification
|
Items
|
Description
|
|
|
Operating Temperature
|
0~ + 50°C
|
|
|
Operating Humidity (non-condensing)
|
20~95 [%RH]
|
|
|
Storage Temperature
|
-30 ~ +60°C
|
|
|
Storage Humidity (non-condensing)
|
10~90 [%RH]
|
|
|
Warranty
|
12 Months
|
|
|
Green
|
RoHs Compliant
|
|
The Country Approvals will determine during ODM requirement
[1] Measured with power meter (CW sensor) under 25℃ room temperature
